KU ScholarWorks

  • myKU
  • Email
  • Enroll & Pay
  • KU Directory
    • Login
    View Item 
    •   KU ScholarWorks
    • Engineering
    • Infrastructure Research Institute Scholarly Works
    • View Item
    •   KU ScholarWorks
    • Engineering
    • Infrastructure Research Institute Scholarly Works
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Evaluation of Corrosion Resistance of Type 304 Stainless Steel Clad Reinforcing Bars

    Thumbnail
    View/Open
    kahrs_corrosion_resistance_2001.pdf (75.37Mb)
    Issue Date
    2001-08
    Author
    Kahrs, Jason T.
    Darwin, David
    Locke, Carl E. Jr.
    Publisher
    University of Kansas Center for Research, Inc.
    Type
    Technical Report
    Is part of series
    SM Report;65
    Published Version
    https://iri.ku.edu/reports
    Metadata
    Show full item record
    Abstract
    The corrosion performance of a prototype 304 stainless steel clad reinforcing bar and conventional reinforcing steel is compared based on corrosion potential and macrocell corrosion tests. Tests are conducted on bare bars and bars symmetrically embedded in a mortar cylinder. Test specimens consist of bars with ends protected with epoxy or with plastic caps filled with epoxy, and clad bars with a hole drilled · through the cladding. Specimens are exposed to a simulated concrete pore solution with a 1.6 molal ion concentration of sodium chloride. Additional corrosion potential tests include specimens exposed to simulated concrete pore solution with and without pressurized air pumped into the solution and a conventional bar with a reduced thickness of mortar cover. Additional macrocell corrosion tests include sandblasted stainless steel clad bars, damaged stainless steel · specimens connected to conventional steel cathodes, mortar covered conventional bars connected to bare conventional bars, and specimens with a reduced thickness of mortar. The thickness and uniformity of the stainless steel cladding is evaluated using a scanning electron microscope. The results indicate the prototype 304 stainless steel clad reinforcement exhibits superior corrosion resistance compared to conventional reinforcing steel, but requires adequate protection at cut ends, where the mild steel core is not covered by cladding. For bare stainless steel clad bars, the macrocell corrosion rate varies between 0.0 to 0.3 μm/yr (0.0 to 0.012 mpy), about 1/ioo of the value observed for conventional bars. Stainless steel bars embedded in mortar exhibit corrosion rates between 0.0 and 0.2 μm/yr (0.0 and 0.008 mpy), averaging 1/io to 1/ 50 of the value exhibited by conventional bars. The corrosion rates for clad bars with a drilled hole through the cladding range between 0.0 and 0.75 μm/yr (0.0 and 0.03 mpy), averaging about 1 / 70 of the value exhibited by conventional steel bars. The thickness of the stainless steel cladding on bars in the current study varies between 0.196 to 0.894 mm (7.7 to 35 mils). Imperfections in the form of an indentation in the base material and a crack in the cladding material filling the indention were observed. The crack did not penetrate the stainless steel cladding and cladding is of adequate thickness to protect the mild steel core. Longer-term tests are recommended, as is use of the bar in demonstration bridge decks.
    URI
    http://hdl.handle.net/1808/20707
    Collections
    • Infrastructure Research Institute Scholarly Works [239]
    Citation
    Darwin, D., Kahrs, J.T., and Locke, C.E., Jr., "Evaluation of Corrosion Resistance of Type 304 Stainless Steel Clad Reinforcing Bars," SM Report No. 65, The University of Kansas Center for Research, Inc., Lawrence, Kansas, August 2001, 76 pp.

    Items in KU ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.


    We want to hear from you! Please share your stories about how Open Access to this item benefits YOU.


    Contact KU ScholarWorks
    785-864-8983
    KU Libraries
    1425 Jayhawk Blvd
    Lawrence, KS 66045
    785-864-8983

    KU Libraries
    1425 Jayhawk Blvd
    Lawrence, KS 66045
    Image Credits
     

     

    Browse

    All of KU ScholarWorksCommunities & CollectionsThis Collection

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    Contact KU ScholarWorks
    785-864-8983
    KU Libraries
    1425 Jayhawk Blvd
    Lawrence, KS 66045
    785-864-8983

    KU Libraries
    1425 Jayhawk Blvd
    Lawrence, KS 66045
    Image Credits
     

     

      Contact KU ScholarWorks
    Lawrence, KS | Maps
     
    • Academics
    • Admission
    • Alumni
    • Athletics
    • Campuses
    • Giving
    • Jobs

    The University of Kansas prohibits discrimination on the basis of race, color, ethnicity, religion, sex, national origin, age, ancestry, disability, status as a veteran, sexual orientation, marital status, parental status, gender identity, gender expression and genetic information in the University’s programs and activities. The following person has been designated to handle inquiries regarding the non-discrimination policies: Director of the Office of Institutional Opportunity and Access, IOA@ku.edu, 1246 W. Campus Road, Room 153A, Lawrence, KS, 66045, (785)864-6414, 711 TTY.

     Contact KU
    Lawrence, KS | Maps