| dc.contributor.author | O’Reilly, Matthew | |
| dc.contributor.author | Darwin, David | |
| dc.date.accessioned | 2016-01-29T20:48:50Z | |
| dc.date.available | 2016-01-29T20:48:50Z | |
| dc.date.issued | 2012-11 | |
| dc.identifier.citation | O'Reilly, M. and Darwin, D., "Rapid Macrocell Tests of 2304 and XM-28 Reinforcing Bars," SL Report 12-3a, University of Kansas Center for Research, Inc., Lawrence, Kansas, November 2012, 17 pp. | en_US |
| dc.identifier.uri | http://hdl.handle.net/1808/19827 | |
| dc.description.abstract | The corrosion resistance of 2304 and XM-28 stainless steel bars, produced by a single mill and supplied by a single supplier, was evaluated using the rapid macrocell test outlined in Annexes A1 and A2 of ASTM A955-12. Bars were tested both before and after undergoing mechanical straightening. Based on the test results, the stainless steel bars satisfy the requirements of ASTM A955-12. The straightening process allowed corrosion to initiate on the bars, but had limited to no effect on the macrocell corrosion rate. | en_US |
| dc.publisher | University of Kansas Center for Research, Inc. | en_US |
| dc.relation.ispartofseries | SL Report;12-3a | |
| dc.relation.isversionof | http://iri.ku.edu/reports | en_US |
| dc.subject | Chlorides | en_US |
| dc.subject | Concrete | en_US |
| dc.subject | Corrosion | en_US |
| dc.subject | Macrocell | en_US |
| dc.subject | Reinforcing steel | en_US |
| dc.subject | Stainless steel | en_US |
| dc.title | Rapid Macrocell Tests of 2304 and XM-28 Reinforcing Bars | en_US |
| dc.type | Technical Report | |
| kusw.kuauthor | Darwin, David | |
| kusw.kudepartment | Civil/Environ/Arch Engineering | en_US |
| dc.identifier.orcid | https://orcid.org/0000-0001-5039-3525 | |
| kusw.oapolicy | This item does not meet KU Open Access policy criteria. | |
| dc.rights.accessrights | openAccess | |
