dc.contributor.advisor | Han, Jie | |
dc.contributor.author | Yang, Xiaoming | |
dc.date.accessioned | 2010-10-03T14:31:23Z | |
dc.date.available | 2010-10-03T14:31:23Z | |
dc.date.issued | 2010-09-01 | |
dc.date.submitted | 2010 | |
dc.identifier.other | http://dissertations.umi.com/ku:11138 | |
dc.identifier.uri | http://hdl.handle.net/1808/6782 | |
dc.description.abstract | Geocell is one of the geosynthetic products used primarily for soil reinforcement. It was originally developed by US Army Corps of Engineers in 1970s for quick reinforcement of cohesionless soil in the military field. Due to its unique three-dimensional geometry, geocell can provide great lateral confinement to the infill soil without relying on the interlocking or friction with the infill soil. Despite the successful applications in various types of civil engineering projects, the mechanism of geocell reinforcement has not been well understood, especially for load-supporting applications. In this study, laboratory model tests (including static load tests and moving wheel load tests) were performed to characterize the performance of the geocell-reinforced soil. A total of four types of geocell (manufactured by PRS Mediterranean, Inc.) were tested in this study. One was made from conventional high density polyethylene (HDPE) and the other three were made from novel polymer alloy (NPA). NPA is a new material characterized by flexibility at low temperatures similar to HDPE with elastic behavior similar to engineering thermoplastic. Test result showed that geocell products tested in this study can improve the modulus and strength of the granular soil under static load, as well as reduce the permanent deformation of the unpaved road under moving wheel loads. Three-dimensional numerical models were developed in this study to simulate the behavior of geocell-reinforced soil under static and repeated loads. In the model for static loading, the infill soil is modeled using a non-linear elastoplastic model (also known as the Duncan-Chang model), and the geocell was modeled using linear elastic plate model. A mechanistic-empirical model was developed for NPA geocell-reinforced soil under repeated loads. This model was developed based on the stress-dependent response model in the current mechanistic-empirical pavement design guide (MEPDG). Some modifications were made to consider (a) the three-dimensional constitutive equation of tangent resilient modulus, (b) the compaction-induced initial horizontal stress in the soil, and (c) the residual stress increase due to the accumulated permanent deformation of geocell with the number of load passes. Analyses showed that the numerical models created in this study can well simulate the experimental result from the geocell-reinforced soils. Based on the calibrated numerical models, a parametric study was performed to investigate the effects from various factors, i.e., (a) thickness of the geocell-reinforced layer, (b) geocell modulus, (c) subgrade stiffness and strength, (d) interface shear modulus, and (e) infill material modulus. The mechanistic-empirical design methods for paved and unpaved roads with geocell-reinforced bases were also discussed. | |
dc.format.extent | 211 pages | |
dc.language.iso | en | |
dc.publisher | University of Kansas | |
dc.rights | This item is protected by copyright and unless otherwise specified the copyright of this thesis/dissertation is held by the author. | |
dc.subject | Civil engineering | |
dc.title | Numerical Analyses of Geocell-Reinforced Granular Soils under Static and Repeated Loads | |
dc.type | Dissertation | |
dc.contributor.cmtemember | Huang, Weizhang | |
dc.contributor.cmtemember | Misra, Anil | |
dc.contributor.cmtemember | Parsons, Robert L. | |
dc.contributor.cmtemember | Schrock, Steven | |
dc.thesis.degreeDiscipline | Civil, Environmental, & Architectural Engineering | |
dc.thesis.degreeLevel | Ph.D. | |
kusw.oastatus | na | |
kusw.oapolicy | This item does not meet KU Open Access policy criteria. | |
kusw.bibid | 8085558 | |
dc.rights.accessrights | openAccess | |