Show simple item record

dc.contributor.advisorAllen, Christopher
dc.contributor.authorSpeer, Peter Clark
dc.date.accessioned2009-05-08T22:47:33Z
dc.date.available2009-05-08T22:47:33Z
dc.date.issued2009-01-01
dc.date.submitted2009
dc.identifier.otherhttp://dissertations.umi.com/ku:10322
dc.identifier.urihttp://hdl.handle.net/1808/4550
dc.description.abstractThis work focuses on the design and evaluation of the inverted-F, meandering-monopole, and loop antenna geometries. These printed antennas are studied with the goal of identifying which is suitable for use in a miniaturized transceiver design and which has the ability to provide superior performance using minimal Printed Circuit Board (PCB) space. As a result, the main objective is to characterize tradeoffs and identify which antenna provides the best compromise among volume, bandwidth and efficiency. For experimentation purposes, three types of meandering-monopole antenna are examined resulting in five antennas for the study. The performance of each antenna under study is evaluated based upon return loss, operational bandwidth, and radiation pattern characteristics. For our purposes, return loss is measured using the S11-port reflection coefficient which helps characterize how efficiently the small antenna is able to be fed. Operational bandwidth is measured as the frequency range over which the antenna maintains 2:1 Voltage Standing Wave Ratio (VSWR) or equivalently has 10-dB return loss. Ansoft High Frequency Structure Simulator (HFSS) is used to simulate expected resonant frequency, bandwidth, VSWR, and radiation pattern characteristics. Ansoft HFSS simulation is used to provide a good starting point for antenna design before actual prototypes are built using an automated protomat router. Simulated results are compared with actual measurements to highlight any differences and help demonstrate the effects of antenna miniaturization. Radiation characteristics are measured illustrating how each antenna is affected by the influence of a non-ideal ground plane. The antenna with best performance is further evaluated to determine maximum range of communication. Range performance of each design is evaluated using a pair of transceivers to demonstrate round-trip communication ability.
dc.format.extent109 pages
dc.language.isoEN
dc.publisherUniversity of Kansas
dc.rightsThis item is protected by copyright and unless otherwise specified the copyright of this thesis/dissertation is held by the author.
dc.subjectElectronics and electrical engineering
dc.subjectAntenna
dc.subjectElectrically
dc.subjectPrinted
dc.subjectSmall
dc.titleThe Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design
dc.typeThesis
dc.contributor.cmtememberBlunt, Shannon
dc.contributor.cmtememberStiles, James
dc.thesis.degreeDisciplineElectrical Engineering & Computer Science
dc.thesis.degreeLevelM.S.
kusw.oastatusna
kusw.oapolicyThis item does not meet KU Open Access policy criteria.
kusw.bibid6857525
dc.rights.accessrightsopenAccess


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record