dc.contributor.author | Matamoros, Adolfo B. | |
dc.contributor.author | Wong, Kuok Hong | |
dc.date.accessioned | 2017-03-09T18:49:08Z | |
dc.date.available | 2017-03-09T18:49:08Z | |
dc.date.issued | 2003 | |
dc.identifier.citation | Matamoros, A., Kuok-Hong, “Design of Simply-Supported Deep Beams using Strut-and-Tie Models,” ACI Structural Journal, VOL. 100, No. 6, November-December 2003. pp. 704-712. | en_US |
dc.identifier.uri | http://hdl.handle.net/1808/23378 | |
dc.description.abstract | A procedure to calculate the amount of reinforcement and the strength of deep beams based on strut-and-tie models is presented. The proposed design equations were calibrated using experimental results from 175 simply supported beams found in the literature with a maximum shear span-to-depth ratio of 3. The strength reduction coefficient for concrete in the main strut was found to decrease with the angle of inclination of the strut, resulting in lower values than those stated in Appendix A of the 2002 edition of the ACI 318 Building Code for beams with shear span-to-depth ratios greater than 1. | en_US |
dc.publisher | American Concrete Institute | en_US |
dc.relation.isversionof | https://iri.ku.edu/reports | en_US |
dc.subject | Beam | en_US |
dc.subject | Shear | en_US |
dc.subject | Strut | en_US |
dc.subject | Tie | en_US |
dc.title | Design of Simply Supported Deep Beams Using Strut-and-Tie Models | en_US |
dc.type | Article | en_US |
kusw.kuauthor | Matamoros, Adolfo B. | |
kusw.kuauthor | Wong, Hong Kuok | |
kusw.kudepartment | Infrastructure Research Institute | en_US |
kusw.oastatus | na | |
kusw.oaversion | Scholarly/refereed, publisher version | en_US |
kusw.oapolicy | This item does not meet KU Open Access policy criteria. | en_US |
dc.rights.accessrights | openAccess | |