Low-Altitude Laser Altimeter to Assist UAV Autolanding
Issue Date
2012-08-31Author
Bergmann, Nicholas M
Publisher
University of Kansas
Format
67 pages
Type
Thesis
Degree Level
M.S.
Discipline
Electrical Engineering & Computer Science
Rights
This item is protected by copyright and unless otherwise specified the copyright of this thesis/dissertation is held by the author.
Metadata
Show full item recordAbstract
This project presents a low-altitude laser altimeter system to assist UAV autolanding. This system generates aircraft altitude and attitude estimates; it consists of laser illuminators, a digital imaging unit (image sensor, lens, and optical filter), and a processor. The purpose of this project is to provide real-time altitude above terrain, roll, and pitch to an existing onboard autopilot system with sufficient accuracy to facilitate the automated landing of the UAV on uncharted landing strips. The laser altimeter system presented by this project employs an optical triangulation concept to estimate the altitude above terrain, roll, and pitch of the aircraft. To implement this system, the Leopardboard 365 is used for the processor; the digital imaging unit is comprised of the Aptina MT9P031 CMOS image sensor, the SY110M ultra-wide angle lens, and the Edmund Optics 780-nm bandpass optical filter; and, four US Lasers 780-nm laser diode modules act as the laser illuminators. Finally, a test fixture was built to assess the speed and accuracy of the system.
Collections
- Engineering Dissertations and Theses [1055]
- Theses [3901]
Items in KU ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
We want to hear from you! Please share your stories about how Open Access to this item benefits YOU.