Consistency and Validity of the Mathematical Models and the Solution Methods for BVPs and IVPs Based on Energy Methods and Principle of Virtual Work for Homogeneous Isotropic and Non-Homogeneous Non-Isotropic Solid Continua

Abstract

Energy methods and the principle of virtual work are commonly used for obtaining solutions of boundary value problems (BVPs) and initial value problems (IVPs) associated with homogeneous, isotropic and non-homogeneous, non-isotropic matter without using (or in the absence of) the mathematical models of the BVPs and the IVPs. These methods are also used for deriving mathematical models for BVPs and IVPs associated with isotropic, homogeneous as well as non-homogeneous, non-isotropic continuous matter. In energy methods when applied to IVPs, one constructs energy functional (I) consisting of kinetic energy, strain energy and the potential energy of loads. The first variation of this energy functional (δI) set to zero is a necessary condition for an extremum of I. In this approach one could use δI = 0 directly in constructing computational processes such as the finite element method or could derive Euler’s equations (differential or partial differential equations) from δI = 0, which is also satisfied by a solution obtained from δI = 0. The Euler’s equations obtained from δI = 0 indeed are the mathematical model associated with the energy functional I. In case of BVPs we follow the same approach except in this case, the energy functional I consists of strain energy and the potential energy of loads. In using the principle of virtual work for BVPs and the IVPs, we can also accomplish the same as described above using energy methods. In this paper we investigate consistency and validity of the mathematical models for isotropic, homogeneous and non-isotropic, non-homogeneous continuous matter for BVPs that are derived using energy functional consisting of strain energy and the potential energy of loads. Similar investigation is also presented for IVPs using energy functional consisting of kinetic energy, strain energy and the potential energy of loads. The computational approaches for BVPs and the IVPs designed using energy functional and principle of virtual work, their consistency and validity are also investigated. Classical continuum mechanics (CCM) principles i.e. conservation and balance laws of CCM with consistent constitutive theories and the elements of calculus of variations are employed in the investigations presented in this paper.