Ge, XuepingYe, QiangSong, LinyongMisra, AnilSpencer, Paulette2017-03-012017-03-012015-09-01Ge, Xueping, Qiang Ye, Linyong Song, Anil Misra, and Paulette Spencer. "Synthesis and Evaluation of Novel Siloxane-methacrylate Monomers Used as Dentin Adhesives." Dental Materials 30.9 (2014): 1073-087.https://hdl.handle.net/1808/23325Objectives The objectives of this study were to synthesize two new siloxane-methacrylate (SM) monomers for application in dentin adhesives and to investigate the influence of different functionality of the siloxane-containing monomers on the adhesive photopolymerization, water sorption, and mechanical properties. Materials and method Two siloxane-methacrylate monomers (SM1 and SM2) with four and eight methacrylate groups were synthesized. Dentin adhesives containing BisGMA, HEMA and the siloxane-methacrylate monomers were photo-polymerized. The experimental adhesives were compared with the control adhesive (HEMA/BisGMA 45/55 w/w) and characterized with regard to degree of conversion (DC), water miscibility of the liquid resin, water sorption and dynamic mechanical analysis (DMA). Results The experimental adhesives exhibited improved water miscibility as compared to the control. When cured in the presence of 12 wt % water to simulate the wet environment of the mouth, the SM-containing adhesives showed DC comparable to the control. The experimental adhesives showed higher rubbery modulus than the control under dry conditions. Under wet conditions, the mechanical properties of the formulations containing SM monomer with increased functionality were comparable with the control, even with more water sorption. Significance The concentration and functionality of the newly synthesized siloxane-methacrylate monomers affected the water miscibility, water sorption and mechanical properties of the adhesives. The experimental adhesives show improved water compatibility compared with the control. The mechanical properties were enhanced with an increase of the functionality of the siloxane-containing monomers. The results provide critical structure/property relationships and important information for future development of durable, versatile siloxane-containing dentin adhesives.This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs License 3.0 (CC BY-NC-ND 3.0 US), which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.http://creativecommons.org/licenses/by-nc-nd/3.0/Siloxane-methacryalteDentin adhesiveWater miscibilityDynamical mechanical propertyPhotopolymerizationArticle10.1016/j.dental.2014.06.004openAccess