Loading...
Practical modifications to improve the sledgehammer source
Keiswetter, Dean Steeples, Don W.
Keiswetter, Dean
Steeples, Don W.
Citations
Altmetric:
Abstract
We have examined frequency and amplitude changes in high-resolution seismic-reflection data associated with practical modifications to the sledgehammer method. Our seismic data, acquired at three sites with different near-surface geology, demonstrate the effects of seating the plate prior to recording, of centered versus noncentered impacts, of subsurface plate emplacement, of various plate-surface covers, and of aluminum versus steel impact plates. Impacts on well-seated plates produced as much as 4 dB higher seismic amplitude than data recorded using unseated plates, and increased the ratio of high-to-low frequencies. Sledgehammer impacts on the edge of the plate decreased seismic amplitude by 6 to 12 dB for frequencies above 100 Hz compared to centered impacts. Placement of the impact plate 1 meter below the ground surface produced a 12 dB amplitude increase for frequencies above 130 Hz at one test site. Plates made of either steel alloy or aluminum produced equivalent seismic signals. The site-dependent nature of some of our results suggests that other investigators may benefit from conducting similar experiments prior to acquiring shallow seismic-reflection data when using the sledgehammer source.
Description
This is the publisher's version, also available electronically from "http://onlinelibrary.wiley.com".
Date
1994-10-01
Journal Title
Journal ISSN
Volume Title
Publisher
American Geophysical Union
Collections
Research Projects
Organizational Units
Journal Issue
Keywords
Citation
Keiswetter, D. & Steeples, D. (1994), Practical modifications to improve the sledgehammer seismic source. Geophysical Research Letters, 21: 2203–2206, http://www.dx.doi.org/10.1029/94GL01957